MLT 2400A Modem Line Tap

* Replaced by the ADMpc *

The Modem Line Tap, MLT2400A is a modem protocol analyzer that translates telephone data communications into standard ASCII characters for display on a PC screen. It provides the POS industry and others with a non-intrusive means of monitoring the telephone line communications between two modems.

Data Analyzer

The Modem Line Tap, MLT2400-A is an analog data analyzer that translates telephone data communications into standard ASCII characters for display on a PC screen. It provides the POS industry and others with a non-intrusive means of monitoring the telephone line communications between two modems.

Passive Connection

The MLT2400-A (Modem Line Tap) is a passive telephone line monitoring device. It is used to decode analog signals sent by interconnecting modems into equivalent ASCII data. The MLT data output can be viewed using a PC with a serial port or a data scope analyzer.

Hardware Independent

Since the MLT is externally connected to the terminal itself, programmers can gain easy access to the communications data without becoming intimately familiar with the hardware used. See the Connection Diagram.

Transaction Monitor

A typical use of the MLT is to monitor transactions between a POS terminal and its interconnected Host processor. The telephone cable normally connected to the POS terminal is moved to the MLT input RJ-11. Another cable, with RJ-11 connectors at each end, is used to connect the MLT loop through input to the POS terminal. Then the serial output from the MLT is routed to the PC

Applications

Debug Application Programs
Troubleshoot Protocol Errors
Detailed Analysis with RS232 Interface to Serial Test, Windows Software.

RS232 PC Interface

The MLT 2400 uses an RS232 to connect to a PC for data analysis. This connection is at 9600bs. Communications data is sent across the RS232 connection for the PC application to display. Originate and Answer identification is also provided depending on the mode selected.

Serial Test Software

Serial Test Software, from Frontline Test Equipment, allows users to easily view the data from the MLT2400. It also allows storage of capture data to hard disk, evaluate timing, and view data in several formats.

Originate vs. Answer

Although any communications package can be used to monitor the MLT data flow, the supplied communications program allows the user to differentiate the originate from the answer side messages by using different colors for display. The answer and originate signals also appear on separate lines of the output connector to allow interconnection to a data scope.